Claude Systems Safety Alert Systems
Wireless Fire Alarm System
Wireless Personal Security System
Safety Alert Wireless Fire Alarm System For the deaf and hard of hearing, to help you meet your DDA obligations.
- Easily Added to Existing Alarm Equipment
- Text Message Location ID to Pagers
- Up to 3km Range
- No Ongoing Contracts
- Self Monitoring
- Site Survey and Fire Test facility built in
- EN54-4 Power Supply
- UL94 V-O Enclosure
This equipment broadens the effectiveness of an existing fire alarm system by wirelessly enabling pocket receivers (dedicated "pagers") to react to an alarm condition over a range of up to 3 km, depending on local topography.
In the event of the alarm being activated, anyone with a "pager" will be alerted by the system, sending the pre-set message or location ID enabling prompt onsite action to be taken.
This system has been designed for all sizes of premises, and in particular dispersed establishments such as universities, colleges and public & commercial buildings.
With EN54-4 approved power supply, and battery condition monitoring, this microprocessor controlled unit can handle up to 13 separate fire panel inputs.
All housed in a UL94 va fire retardent plastic housing, with test and site survey keyswitch facility built in.
Safety Alert Wireless Fire Alarm System For the deaf and hard of hearing, to help you meet your DDA obligations.
- Easily Added to Existing Alarm Equipment
- Text Message direct to Pagers - no contracts
- Up to 250m Range
- Up to 6 zones
- Powered by Existing Fire Panel PSU
This equipment broadens the effectiveness of an existing fire alarm system by wirelessly enabling personal pagers to display and vibrate, signalling an alarm condition over a range of up to 250m, depending on local topography.
The unit consists of a wall mounted transmitter, and is +24VDC or +12VDC powered (supplied from Fire Panel).
In the event of the alarm being activated, (when an auxiliary relay in the fire panel closes), anyone with a "pager" will be alerted by the transmitted pre-set message, enabling prompt onsite action to be taken.
Up to 6 fire zones can be accommodated and a separate message sent for each one.
This product has been specifically tailored to meet the needs of the smaller organisation that needs to provide this cover, but does not want to go to the expense of a fully internally powered, and monitored solution.
To automatically or manually summon assistance in lone worker emergency situations. Helping you to meet your employer Health and Safety obligations for your staff.
- Pocket 'Pager' with Vibrate and/or Bleep
- Text Message ID
- No Contracts
- Can be used with Autodiallers
- Siren and Flashing Light Available
The workerSentry system is designed to help protect lone workers and provide a means of raising an alarm within an organisation. A system comprises of one or more transmitters, carried or worn by the lone worker(s) which when activated, send an alarm signal back to a central receiver.
The Lone worker transmitter can be carried in a pocket, or worn in the carrying pouch (supplied). It features buttons, which allow a worker to call for help, and it also features a tilt switch, which automatically triggers an alarm should the worker collapse, or be injured. The pull-cord is a security feature, which may be clipped to a belt, and should the unit be forcibly removed, an alarm will be triggered.
The central receiver is a wall-mounted enclosure, featuring a number of indicators, a sounder, and a reset button. Upon receiving an alarm signal, the corresponding indicator illuminates, and the sounder starts. The alarm is cancelled when the reset button on the central receiver is pressed.
All equipment conforms to the UK licensing requirements & CE regulations.